1260-14C RACAL INSTRUMENTS Digital Module

Review RACAL INSTRUMENTS 1260-14 Digital I/o Module Untested

The RACAL 1260-14C 1260-14 Digital I/O Module is a versatile and reliable input/output expansion solution designed for various industrial automation applications. This module is part of the RACAL 1260 series, which is known for its robustness and ease of use.

The 1260-14C Digital I/O Module offers 16 channels, each configurable as either an input or an output. These channels support various logic levels, including TTL and DTLS, making it compatible with a wide range of automation systems. The module's digital inputs can detect both positive and negative logic levels, while the outputs can source or sink up to 250mA of current, ensuring adequate power for most applications.

One of the key features of the 1260-14C Digital I/O Module is its high-speed data transfer capability. It can handle data rates up to 2.5 Mbps, ensuring that it can keep up with even the most demanding automation processes. This module also supports various data transfer protocols, including RS-485 and Modbus, making it a flexible choice for various control systems.

The 1260-14C Digital I/O Module is designed with industrial applications in mind. It features a rugged, compact design with an operating temperature range of -20 C to 70 C, ensuring reliable operation even in harsh environments. The module is also protected against overvoltage and overcurrent conditions, adding an extra layer of safety to your automation system.

The RACAL 1260-14C 1260-14 Digital I/O Module offers easy integration with other automation components. It can be mounted directly to DIN rail or can be positioned remotely using a suitable cable length. The module also includes LED indicators for each channel, making it easy to monitor the status of each input and output at a glance.

Overall, the RACAL 1260-14C 1260-14 Digital I/O Module is a powerful and versatile expansion solution for industrial automation systems. Its high-speed data transfer capabilities, compatibility with various logic levels and data transfer protocols, and rugged design make it a reliable and adaptable choice for a wide range of applications.

The RACAL 1260-14C 1260-14 Digital I/O Module is a versatile data acquisition solution designed for various industrial applications. This module offers 14 channels of digital I/O, allowing users to interface with various sensors and actuators. In this response, we will discuss the potential advantages and disadvantages of using this module in your projects.

1. Compatibility: The RACAL 1260-14C module is compatible with various data acquisition systems, making it a flexible choice for users who may switch between different systems or require a standalone solution.

2. Easy Setup: The module includes a user-friendly configuration software, which simplifies the setup process and reduces the time spent on configuration.

3. High Density: With 14 channels in a compact form factor, this module can save valuable space in control panels and other applications where space is limited.

4. Isolated I/O: The module provides electrical isolation between the input and output channels, ensuring data integrity and protecting against potential damage caused by common-mode noise or ground loops.

5. Wide Voltage Range: The RACAL 1260-14C module can handle a wide range of input and output voltages (4-30VDC), making it suitable for use in various industrial environments.

1. Limited Analog Inputs: The module offers only digital I/O channels. If your application requires analog input, you may need to consider additional components or modules.

2. Cost: Compared to other digital I/O modules in the market, the RACAL 1260-14C may be more expensive. This could be a concern for small projects or budget-conscious users.

3. Limited Communication Options: The module primarily relies on RS-232 serial communication for configuration and data transfer. Users requiring other communication protocols may need to invest in additional hardware or software.

In conclusion, the RACAL 1260-14C 1260-14 Digital I/O Module offers several advantages such as compatibility, easy setup, high density, electrical isolation, and a wide voltage range. However, it also has some disadvantages, including limited analog inputs, cost, and communication options.

If your project specifically requires digital I/O and meets the other compatibility and space requirements, the RACAL 1260-14C module could be a suitable choice. However, if analog inputs, a different communication protocol, or a lower cost are essential factors, you may need to consider alternative options. Ultimately, the decision depends on the unique requirements of your project and the resources available to you.

Details:

This module offers high-quality digital inputs and outputs for precise testing measurement. The Racal instruments 1260-14C digital i/o module is a specialized component designed for use in pix and xvi systems. With the reliable Racal instruments brand behind it, this untested module holds great potential for improving functionality and efficiency of a variety industrial inspection applications.

specifications vpxisyst:

• brand: Racal Instruments
• mpn: 1260-14c
• part type: Digital Instrument Module

payments vpxisyst:

• credit card: visa
• other
• wallet: paypal

general vpxisyst:

• category: Business & Industrial > Test, Measurement Inspection > Systems > Pxi Vxi Boards Modules

returns vpxisyst:

• policy: returns accepted
• paid by: buyer
• method: money back
• time: 30 days

offer vpxisyst:

• availability: in stock
• options: ship-to-home
• sold #: 20
• prices: $875.00–$950.00
• item condition:
  • Seller refurbished
  • Used
  • Brand New
• started: april 24, 2025
• best offers: true
• in stock #: 5

seller vpxisyst:

• city: madison, pennsylvania
• rating: 98.5%
• # reviews: 1876

shipping vpxisyst:

• carrier: usps
• service: usps ground advantage
• transit: 8-14 days
• class: standard
• type: calculated